1972-93 Dodge Truck / Ramcharger repair panels
All parts are hand made in the USA on our own tooling with patterns made from rust free original parts. Some panels may require trimming and fitting to install. Our panels are made as close to original thickness and dimensions as possible
We continue to add to our list of body parts for these trucks. All parts are made with 18ga (.047) or 16 ga (.059) sheet metal not the thinner 20 ga (.035) others use These parts are the best aftermarket parts available for your 1972-93 Dodge Truck and no effort has been spared in making each piece as correct as possible.
With questions or to Order by phone call 717-573-2811 M-F 8am-6pm est or online.24 hrs. Visa and Mastercard accepted. also available some saturdays and evenings.
To order by phone, 717-573-2811
Shipping is calculated for the lower 48 U.S. states only, please call or email for shipping to other locations.
Floor Pan made from original thickness 18ga steel. inculdes all of the original bends and contours. Extends from the factory seam at the firewal to just under the seat and from the factory seam at the door jamb to the transmission tunnel. Measures 36" long x27" wide. 2WD and 4WD have different transmission tunnels. Make sure to order the correct floor pan for your truck.
© Exline Custom Auto, LLC ©
©All photos and content of this site are property of Exline Custom Auto,LLC©
717-573-2811
2WD autmatic
small transmission tunnel
2WD manual or all 4WD
large transmission tunnel
out of stock $100 pair
outer rocker patch
This patch will repair rust from the front edge of the rocker back to 2" past the door opening.
Cab mount bracket, front
16 steel like the original.
out of stock $134 pair
out of stock
$414 pair
Bed bottom
6' or 8'
Bed bottom 6' $596
Bed bottom 8' $ 618
Bed bottoms are 18Ga steel , the ribs are not exactly the same shape as original. We cut them in 2 pieces to make shipping easier you will need to weld the 2 pieces together in the middle. If you want it in one piece you can pick it up or arrange freight shipping.
we can also stamp custom size pieces up to 6 feet long .
Exline Custom Auto is a one person operation and all parts are made by hand one at a time.
